This page contains a technical description of the back-door found in Samsung Galaxy devices.
For a general description of the issue, please refer to the statement published on the Free Software Foundation's website.
This back-door is present in most proprietary Android systems running on the affected Samsung Galaxy devices, including the ones that are shipped with the devices. However, when Replicant is installed on the device, this back-door is not effective: Replicant does not cooperate with back-doors.
AbstractSamsung Galaxy devices running proprietary Android versions come with a back-door that provides remote access to the data stored on the device.
In particular, the proprietary software that is in charge of handling the communications with the modem, using the Samsung IPC protocol, implements a class of requests known as RFS commands, that allows the modem to perform remote I/O operations on the phone's storage. As the modem is running proprietary software, it is likely that it offers over-the-air remote control, that could then be used to issue the incriminated RFS messages and access the phone's file system.
Known affected devicesThe following table shows which devices are known to contain this back-door as part of the software they ship with.
Please contact us if you know about some other device that could be concerned by this back-door or have more information on one of the listed devices!
Device Incriminated program running as root SELinux enabled libsamsung-ipc support Replicant support
Nexus S (I902x) No Possible with Android 4.2 and later Yes Yes
Galaxy S (I9000) Yes ? Yes Yes
Galaxy S 2 (I9100) No ? Yes Yes
Galaxy Note (N7000) No ? Yes Yes
Galaxy Nexus (I9250) No Possible with Android 4.2 and later Yes Yes
Galaxy Tab 2 7.0 (P31xx) No ? Yes Yes
Galaxy Tab 2 10.1 (P51xx) No ? Yes Yes
Galaxy S 3 (I9300) No ? Yes Yes
Galaxy Note 2 (N7100) No ? Yes Yes
While we don't have any absolute certainty regarding other Samsung Galaxy devices, it is likely that any other such device in its 3G flavor is affected by the back-door as well, as it probably uses the Samsung IPC protocol with the same proprietary user-space implementation.
Back-door sampleIn order to investigate the back-door and check what it actually lets the modem do, some code was added to the modem kernel driver to make it craft and inject requests using the incriminated messages and check its results.
The following patch: 0001-modem_if-Inject-and-intercept-RFS-I-O-messages-to-pe.patch (to apply to the SMDK4412 Replicant 4.2 kernel) implements a sample use of the back-door that will:
open the /data/radio/test file
read its content
close the file
This demonstrates that the incriminated software will execute these operations upon modem request. Note that the software implementation appends /efs/root/ to the provided path, but it's fairly simple to escape that path and request any file on the file system (using ../../). Note that the files are opened with the incriminated software's user permissions, which may be root on some devices. On other cases, its runs as an unprivileged user that can still access the user's personal data (/sdcard). Finally, some devices may implement SELinux, which considerably restricts the scope of possible files that the modem can access, including the user's personal data (/sdcard/).
The following sample was obtained on a Galaxy Note 2 (N7100) running CyanogenMod 10.1.3.
Sample file
The sample file used for this demonstration (/data/radio/test) is filled with "Hello World!":
root@android:/ # hexdump -C /data/radio/test
00000000 48 65 6c 6c 6f 20 57 6f 72 6c 64 21 0a |Hello World!.|
0000000d
Kernel log
<3>[ 62.712637] c0 mif: rx_iodev_skb: rx_iodev_skb: Dropping RFS frame
<3>[ 62.712808] c0 mif: rfs_craft_start: rfs_craft_start: Crafting open
<3>[ 62.712966] c0 mif: rfs_craft_start: rfs_craft_start: Adding SKB to queue
<3>[ 62.713122] c0 mif: rx_iodev_skb: rx_iodev_skb: Dropping RFS frame
<3>[ 62.744690] c0 mif: misc_write: misc_write: Intercepted RFS response
<3>[ 62.744867] c0 mif: rfs_craft_write: rfs_craft_write: Open response: fd=21, errno=0
<3>[ 62.745116] c0 mif: rfs_craft_write: rfs_craft_write: Adding SKB to queue
<3>[ 62.792888] c0 mif: misc_write: misc_write: Intercepted RFS response
<3>[ 62.793026] c0 mif: rfs_craft_write: rfs_craft_write: Read response: 12 bytes read
<3>[ 62.793154] c0 mif: mif_print_data: 0000: 48 65 6c 6c 6f 20 57 6f 72 6c 64 21
<3>[ 62.793284] c0 mif: rfs_craft_write: rfs_craft_write: Adding SKB to queue
<3>[ 62.796168] c0 mif: misc_write: misc_write: Intercepted RFS response
<3>[ 62.796269] c0 mif: rfs_craft_write: rfs_craft_write: Rx RFS message with command 0x6 and size 14
<3>[ 62.796422] c0 mif: mif_print_data: 0000: 00 00 00 00 00 00 00 00
The relevant part is the response to the read request:
<3>[ 62.793026] c0 mif: rfs_craft_write: rfs_craft_write: Read response: 12 bytes read
<3>[ 62.793154] c0 mif: mif_print_data: 0000: 48 65 6c 6c 6f 20 57 6f 72 6c 64 21
which matches the content of the /data/radio/test file, hence making it obvious that the incriminated software implements the back-door.
Incriminated software log
E/RIL ( 1927): processRFS: received standalone RFS frame. len 35
E/RIL ( 1927): ipc_recv_rfs()
E/RIL ( 1927): get_wakelock: 1. on 1, ril_WakeLock_Mask 0
E/RIL ( 1927): get_wakelock: 2. on 1, ril_WakeLock_Mask 1
E/RIL ( 1927): RxRFS_OpenFile:
E/RIL ( 1927): RxRFS_OpenFile: open file "/efs/root/../../data/radio/test" flag O_RDWR (0x00000002)
E/RIL ( 1927): check dir '/efs/root/../../data/radio'
E/RIL ( 1927): A directory already exists.
E/RIL ( 1927): RxRFS_OpenFile: length 14
E/RIL ( 1927): TxRFS_CfrmOpenFile()
E/RIL ( 1927): TxRFS_CfrmOpenFile(): length 14
E/RIL ( 1927): IPC_send_singleRfsIPC: fd 16 sendto 14 bytes rfs_hdr =6
E/RIL ( 1927): get_wakelock: 1. on 0, ril_WakeLock_Mask 1
E/RIL ( 1927): get_wakelock: 2. on 0, ril_WakeLock_Mask 0
E/RIL ( 1927): set_wakelock: secril_rfs-interface 0
E/RIL ( 1927): set_wakelock: secril_fmt-interface 1
E/RIL ( 1927): processIPC: Single IPC plen 23, pkt 23
E/RIL ( 1927): processRFS: received standalone RFS frame. len 14
E/RIL ( 1927): ipc_recv_rfs()
E/RIL ( 1927): get_wakelock: 1. on 1, ril_WakeLock_Mask 0
E/RIL ( 1927): get_wakelock: 2. on 1, ril_WakeLock_Mask 1
E/RIL ( 1927): RxRFS_ReadFile:
E/RIL ( 1927): RxRFS_ReadFile: length 4110
E/RIL ( 1927): TxRFS_CfrmReadFile()
E/RIL ( 1927): TxRFS_CfrmReadFile(): length 4110
E/RIL ( 1927): IPC_send_singleRfsIPC: fd 16 sendto 4110 bytes rfs_hdr =6
E/RIL ( 1927): processRFS: received standalone RFS frame. len 10
E/RIL ( 1927): get_wakelock: 1. on 0, ril_WakeLock_Mask 1
E/RIL ( 1927): get_wakelock: 2. on 0, ril_WakeLock_Mask 0
E/RIL ( 1927): set_wakelock: secril_rfs-interface 0
E/RIL ( 1927): [EVT]:Req(0), RX(0)
E/RIL ( 1927): ipc_recv_rfs()
E/RIL ( 1927): get_wakelock: 1. on 1, ril_WakeLock_Mask 0
E/RIL ( 1927): get_wakelock: 2. on 1, ril_WakeLock_Mask 1
E/RIL ( 1927): RxRFS_CloseFile:
E/RIL ( 1927): RxRFS_CloseFile: length 14
E/RIL ( 1927): TxRFS_CfrmCloseFile()
E/RIL ( 1927): TxRFS_CfrmCloseFile(): length 14
E/RIL ( 1927): IPC_send_singleRfsIPC: fd 16 sendto 14 bytes rfs_hdr =6
AnalysisThe following analysis was conducted using the libsec-ril.so binary file (the incriminated proprietary software) as extracted from the CyanogenMod 10.1.3 system zip for the Galaxy S 3 (I9300), from location system/lib/libsec-ril.so.
The developers involved in the present analysis did not ever agree to any sort of End User License Agreement that explicitly prohibited the reverse engineering and decompiling operations of the incriminated binary. The reverse engineering operations that led to these findings originally took place during the development of Samsung-RIL, the free software replacement for the incriminated program. Hence, we believe these operations were conducted for the sole purpose of interoperability and not with the intent of creating a competing product. As the involved developers were based in Europe, we believe the legality of these operations is granted by article 6 of the 1991 EU Computer Programs Directive.
As a first approach, using the strings tool against the incriminated program reveals numerous suspicious command names that appear to be Samsung IPC protocol definitions:
IPC_RFS_READ_FILE
IPC_RFS_WRITE_FILE
IPC_RFS_LSEEK_FILE
IPC_RFS_CLOSE_FILE
IPC_RFS_PUT_FILE
IPC_RFS_GET_FILE
IPC_RFS_RENAME_FILE
IPC_RFS_GET_FILE_INFO
IPC_RFS_UNLINK_FILE
IPC_RFS_MAKE_DIR
IPC_RFS_REMOVE_DIR
IPC_RFS_OPEN_DIR
IPC_RFS_READ_DIR
IPC_RFS_CLOSE_DIR
IPC_RFS_OPEN_FILE
IPC_RFS_FTRUNCATE_FILE
IPC_RFS_GET_HANDLE_INFO
IPC_RFS_CREATE_FILE
The names of these commands make it obvious that they let the modem perform I/O operations.
The strings utility also reveals matching function names that seem to implement the handling of these commands:
RxRFS_GetFile
RxRFS_CreateFile
RxRFS_ReadDirectory
RxRFS_OpenDirectory
RxRFS_RenameFile
RxRFS_Default
RxRFS_OpenFile
RxRFS_ReadFile
RxRFS_FtruncateFile
RxRFS_WriteFile
RxRFS_GetFileInfoByHandle
RxRFS_GetFileInfo
RxRFS_PutFile
RxRFS_LseekFile
RxRFS_CloseFile
RxRFS_DeleteFile
RxRFS_MakeDirectory
RxRFS_CloseDirectory
RxRFS_RemoveDirectory
TxRFS_CfrmCreateFile
TxRFS_CfrmPutFile
TxRFS_CfrmOpenDirectory
TxRFS_CfrmGetFileInfo
TxRFS_CfrmReadDirectory
TxRFS_CfrmRenameFile
TxRFS_CfrmCloseFile
TxRFS_CfrmFtruncateFile
TxRFS_CfrmGetFileInfoByHandle
TxRFS_CfrmDeleteFile
TxRFS_CfrmCloseDirectory
TxRFS_CfrmRemoveDirectory
TxRFS_CfrmMakeDirectory
TxRFS_CfrmGetFile
TxRFS_CfrmReadFile
TxRFS_CfrmWriteFile
TxRFS_CfrmLseekFile
TxRFS_CfrmOpenFile
Taking a closer look at these functions, using the objdump decompiler, reveals that they are actually called from the ipc_recv_rfs function, itself called from process_ipc_notify_message, which appears to handle the received messages from the modem. Hence we can deduct that the incriminated functions are actually called upon modem request.
Taking a closer look at one of these functions, e.g. RxRFS_ReadFile reveals multiple calls to the Procedure Linkage Table (PLT). Hence we believe these calls are linked functions from the libc library, especially I/O-related functions such as (in a general manner) open, close, read, write, etc.
Samsung IPC RFS messagesThe following table associates each Samsung IPC RFS message with its hexadecimal command value:
Message Hexadecimal command value
IPC_RFS_NV_READ_ITEM 0x01
IPC_RFS_NV_WRITE_ITEM 0x02
IPC_RFS_READ_FILE 0x03
IPC_RFS_WRITE_FILE 0x04
IPC_RFS_LSEEK_FILE 0x05
IPC_RFS_CLOSE_FILE 0x06
IPC_RFS_PUT_FILE 0x07
IPC_RFS_GET_FILE 0x08
IPC_RFS_RENAME_FILE 0x09
IPC_RFS_GET_FILE_INFO 0x0a
IPC_RFS_UNLINK_FILE 0x0b
IPC_RFS_MAKE_DIR 0x0c
IPC_RFS_REMOVE_DIR 0x0d
IPC_RFS_OPEN_DIR 0x0e
IPC_RFS_READ_DIR 0x0f
IPC_RFS_CLOSE_DIR 0x10
IPC_RFS_OPEN_FILE 0x11
IPC_RFS_FTRUNCATE_FILE 0x12
IPC_RFS_GET_HANDLE_INFO 0x13
IPC_RFS_CREATE_FILE 0x14
IPC_RFS_NV_WRITE_ALL_ITEM 0x15
LegitimacyThe incriminated RFS messages of the Samsung IPC protocol were not found to have any particular legitimacy nor relevant use-case. However, it is possible that these were added for legitimate purposes, without the intent of doing harm by providing a back-door. Nevertheless, the result is the same and it allows the modem to access the phone's storage.
However, some RFS messages of the Samsung IPC protocol are legitimate (IPC_RFS_NV_READ_ITEM and IPC_RFS_NV_WRITE_ITEM) as they target a very precise file, known as the modem's NV data. There should be no particular security concern about these as both the proprietary implementation and its free software replacement strictly limit actions to that particular file.
Areas of work Some work could be done in order to handle that back-door:
Samsung-RIL could show a message alerting the user when the back-door is being used, including the requested path and asking the user to save logs and contact us.
Alternatively, the kernel could block the incriminated RFS requests and keep a trace of them in the logs for the record. That option would work for CyanogenMod, where the incriminated proprietary blob is still used.
NotesOur free software replacement for the incriminated binary is Samsung-RIL which relies on libsamsung-ipc: both are used in Replicant.
The affected devices have modems that use the Samsung IPC protocol, mostly Intel XMM6160 and Intel XMM6260 modems. Note that despite this back-door, the devices using these modems are most likely to have good modem isolation, compared to other devices using Qualcomm platforms. Bear in mind that this back-door is implemented in software and can easily be removed by installing a free replacement for the incriminated software, for instance by installing Replicant. Hence, we don't consider the incriminated devices to be inherently bad targets because of this back-door.
Bron:
Redmine